THX1138
Elite Veteran
Location: Plainfield, IN
| So, how does one go about connecting the VR5203 though the V-bar. If I had to make and educated guess, I would say this...
The cyclic servos will connect to the V-bar like normal.
For the throttle, in my case anyway, would go from the RX to the VR. From the VR to my MultiGov and the throttle servo hooked to the MultiGov like normal.
The tail servo would go from the V-bar to the VR then VR to the tail servo?
Does this sound right?
Lou
Bowstrings, Banjo's, and Birkenstocks. |
