RunRyder - 8v and Fasst?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 620 ONLINE 42 EVENTS SEARCH REGISTER START HERE

3 pages [ << < 1 2 ( 3 ) > >> ]

2192 views

POST REPLY

Thunder Power RC	.	Real Raptors	.	Mikado Modellhubschrauber
	.		.

Radio - Futaba FASST > 8v and Fasst?

cannibal440
Senior Heliman
Location: cookeville, tennessee USA

if your servos can run at 8v but your rx cant you can always disconnect the power wire comming from the servo to the rx and make your own power to the servos at 8v and have a reg going to the rx for signal feed.

06-26-2008 07:34 PM

HOMEPAGE

doublah
Senior Heliman
Location: USA

I have been running 8 volts for about 3 weeks now with no problems. Using BLS 351's and BLS 451's. Also, i am using the 617 receiver and the 6014 with no problems. Probably 40 flights.

VBlades
Thunder Power
RCCustomPainting.com

06-26-2008 09:36 PM

hyflyr
Senior Heliman
Location: Baton Rouge, LA

When you say 8v is anything regulated? What are doing about the tail servo? What duration are your flights? What capacity 2s lipo are you running?

06-27-2008 02:04 AM

legoman67
Elite Veteran
Location: Nanoose Bay B.C, Canada

tail should always be 4.8 NO QUESTION!

some governors probably dont like 8v, so its best to ask depending on the one your using,

this is very tempting, ive got a 6014 and 3 8717's comming for vibe #2..... hmm

Matt M.
http://www.filepile.ca

06-27-2008 06:44 AM

HOMEPAGE

doublah
Senior Heliman
Location: USA

I am using both 2s2p 2600 mah in my 50 and 4000 mah in my 90. I use a Spektrum Regulator just for the tail servo. I am running everything else on 8 volts. I have a Spartan and Multigov.

VBlades
Thunder Power
RCCustomPainting.com

06-27-2008 12:31 PM

helis
Heliman
Location: CO

06-30-2008 06:37 PM

3 pages [ << < 1 2 ( 3 ) > >> ]

2192 views

POST REPLY

GrandRC	.	CanoMod	.	Futaba-RC
	.		.

Radio - Futaba FASST > 8v and Fasst?

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic