RunRyder - T-REX 600 Cycl Servos

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 800 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

352 views

POST REPLY

A Main Hobbies	.	Boca Bearings	.	Modefo's RC Helicopters
	.		.

e-Align T-REX 250-450-500-600 > T-REX 600 Cycl Servos

spencer737
Senior Heliman
Location: here

Okay guys I can not for the life of me decide on cyclic servos for my 600e, the frames are close together so my options are slim. Here is what I am looking at
-S9551: low profile+++ but how do they perform
-DS8717's: Too tall?
-DS8317's
-S9252's
-S9452's
-S9351's: too tall???

HELP!!!!!

02-19-2008 06:14 AM

baddraptor
Elite Veteran
Location: valencia, ca- usa

I know you didnt list them but Hitec 6965hb is an AWESOME servo for the trex. Not nearly as power hungry as the 8717, but just as fast. Ok .01 of a second slower.

**Unattended children will be givin a shot of espresso and a puppy**

02-19-2008 06:20 AM

spencer737
Senior Heliman
Location: here

the reason i did not pick those is because the horn issue

02-19-2008 06:24 AM

MolokaiBoy
Key Veteran
Location: Kailua-Kona,Hawaii USA

I have been having great luck with 9452's on both E & N versions

Les
You gonna fly that??

02-19-2008 07:15 AM

HOMEPAGE

baddraptor
Elite Veteran
Location: valencia, ca- usa

Quote
the reason i did not pick those is because the horn issue

Ahhh, the dreaded horn non issue strikes again. They work fine with the Align wheels. They seem a little loose when you put them on but they tighten up nicely when you screw it down. or you can use the hitec wheels and drill your own holes.

But anyway, the 9452 is a nice servo.
As is the bls451.

**Unattended children will be givin a shot of espresso and a puppy**

02-19-2008 07:49 AM

Ben-T-Spindle
Elite Veteran
Location: Central Illinois

BLS451 seams to be the new trend – they do have much better performance than any of the others but they are a little more expensive.

... BTS

02-19-2008 11:37 AM

Gopedasia
Heliman
Location: Manila Philippines

How about the :

1) Hitec 5985mg?
2) Hitec 5945mg?
3) Hitec 5996tg?

Any one using these?

Birds of the same feather......look alike :)

02-19-2008 01:35 PM

HOMEPAGE

Wyorcflyer
Senior Heliman
Location: Cheyenne, Wyoming USA

S9551 sure look good on paper

I have the HITEC 6965's on my TREX and they work fine. WARNING! If you do use these don't put your gyro up front. I tried to move my 401 to a front mount, I did buy the mount I did not mount them on the servos, and the chatter from the 6965's was pretty amazing.

I like the numbers on the S9551 as well. How else can you loose 1.5oz and save money. They are only 1.6oz. If you use BLS451's or 8717 you are over 2.1 to 2.3 oz. That is .5 oz per servo or 1.5oz total. That is about all you can gain by buying carbon gear!

I would sure like to hear from someone who has tried them, they sure look like a good fit.

Jack Patton

10-04-2008 01:58 AM

Helisonmymind
Senior Heliman
Location: Toronto, Canada

I like my 9452's

Helisonmymind - my fleet: 500CF, 600ESP 8S, 600NSP, CX, CX2

10-04-2008 03:45 AM

llamont
Senior Heliman
Location: California

Hello all:

What is the deal with the horn issue and the uber-stealth 8717's. My good buddy has 8717's in his 600E and he seems to be very pleased with the performance of the servos. As for the horns, I believe that he uses the stock 4-point horns that are included with the servos. Personally, I'm using Airtronic 94357's on the cyclic of my 600E and I am happy. Although they don't have the supreme numbers of the ultra capable 8717's, my servos still put out 125oz./.07 sec on 6V.

That's more than enough juice for the 600! Good luck with your decision.

Thanks
Loren

10-04-2008 08:00 AM

Mike66
New Heliman
Location: Darmstadt, Germany

I narrowed my choice to:

BLS451
S9452
HS5965MG

I selected the BLS451 only because I found a good deal for four NIB servos. Otherwise, I was going to use the S9452. I have a Logictech 6100T/6100G for the tail.

_______________
T-Rex 600
T-Rex 500
PhoenixRC

10-04-2008 03:48 PM

Ben-T-Spindle
Elite Veteran
Location: Central Illinois

Brushless servos are always a good choice because they last longer (5 times longer according to Futaba), they take less power, and have much better dynamic performance. You will definitely feel the difference – good choice!

After flying a set all summer I would never buy a non-brushless servo. I am surprised that other manufactures have not started selling them.

... BTS

10-04-2008 05:05 PM

emag remrofni
Key Veteran
Location: Los Angeles California

The 9452's are very good servos.

**Compass Models**
**Modefo's Heli's**
**Lightning Power Batteries**

10-04-2008 05:11 PM

1 page

352 views

POST REPLY

XHELI.COM	.	Autography FlightPower	.	Advantage Hobby
	.		.

e-Align T-REX 250-450-500-600 > T-REX 600 Cycl Servos

PRINT TOPIC

Advertisers

Subscribe to This Topic