RunRyder - bec question.

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 795 ONLINE 19 EVENTS SEARCH REGISTER START HERE

1 page

106 views

POST REPLY

Thunder Power RC	.	Mikado Modellhubschrauber	.	GrandRC
	.		.

e-E-Sky Honey Bee- Lama- Belt CP- E-Smart > bec question.

ragtop
Senior Heliman
Location: salt lake city, utah, usa

i got a hh gyro and in hh mode and in standard mode, i have to ajdust it a little during the duration the pack. like it will be centered and after a min or two i will have to add left trim, then mort left trim after a min and so on. will a bec help keep this.
pix for clicks

I wish I was good at this

02-08-2008 05:01 AM

Griffin
Senior Heliman
Location: On your Screen

I'm pretty sure the short answer is no. A BEC is not going to help you with this problem. As the battery wears your losing headspeed and in turn holding power of the tail. It has nothing to do with the voltage to the gyro or servos.

02-08-2008 05:29 AM

Sgt Heli
Veteran
Location: Remlap, Al USA

Your gyro should be able to make adjustments along the way that keep the tail straight, right? Make sure your gyro is setup right.

Looking at your picture it appears the servo shown on the cyclic has intereference with wiring. These Esky servos wont stand much of that. I had some binding with my tail servo original and it took me no time to cook it.

02-08-2008 11:23 AM

tryan02
rrProfessor
Location: Canton, Missouri

Dont forget you dont have a top of the line gyro there so if your just hovering it may not be perfect. but should hold fine in forward flight

02-08-2008 11:45 AM

HOMEPAGE

DougsRC
Elite Veteran
Location: MA

Personally , I like a little redirecting of the tail. Thats part of controlling the heli--- but thats just me