rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 741 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page396 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Webra 91 in a Vigor CS
 
 
Crashr30
Senior Heliman
Location: DFW

I would like to put a Webra 91 in a CS, but I understande that the cranshaft diameter on the Webra is smaller than OS. If this is the case , does JR make a collet set to fit the Webra engine? Thanks.
03-18-2003 Over year old.
 
 
m1ke1
Veteran
Location: New Salem, Massachusetts

I have looked at parts listing for both motors and both have a 5/16 shaft so you should have no problems.
03-18-2003 Over year old.
 
 
svinaldo
Heliman
Location: Oslo, Norway

The Webra 91 is delivered with two different crankshaft diameters, 8mm and 5/16. I have the 5/16 type, and it fits the Vigor with no problem.

I don't know if there is a collet available, in case you already have the 8mm type.
03-18-2003 Over year old.
HOMEPAGE  
 
 
Secret Squirrel
Key Veteran
Location: New Zealander living in Melbourne, Australia

When installing teh Webra 91 in my Standard Vigor, we had to shave a little off the inside of the mounts so it would sit flush. Other than that it bolts in.

Si

-------------
Simon Lockington
03-18-2003 Over year old.
HOMEPAGE  
 
 
Crashr30
Senior Heliman
Location: DFW

Thanks

Thanks for the info. You cleared up the questions that I had. The particular Webra I saw had the Heim crankshaft. It is all much clearer now.
03-19-2003 Over year old.
 
 
1 page396 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Webra 91 in a Vigor CS
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 7:53 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie