swampd20155
Heliman
Location: Chantilly, VA
| Greetings, all!
I'm trying to use an Ikarus Profi with my CP Piccolo, AstroFlight 010 w/Phoenix 10 on the mains, DC5-2.4 w/HF-100 on the tail, GWS 6ch rx, and a Futaba 8U standard (not super). My problem is with setup of normal vs. HH - there doesn't seem to be a difference regardless of how I set it up. I'm using channel 5 as the gain/sensitivity channel and have set what I believe to be normal mode to anywhere from 30% to 100% (limits on ATV for channel 5 on the 8U) and HH to anwhere from 50% to 100% - all with no apparent difference in response. It always seems to come up in HH mode, but wags badly during spin up, hove in ground effect, and any time I change the head speed. Seems to lock OK in hove out of ground effect, but "seeks" again if I perturb it in yaw or change head speed.
Anyone out there using a Profi with a Piccolo (or other electric with a tail motor) with any experience like this?
Thanks in advance, folks!
Keep the blades up when landing!
Marsh |
