MJPCarbon Senior Heliman Location: West Milford New Jersey
I have made fins for what I think are the most popular.
What other types are needed?
Thanks to all for your support.
mjp
www.mjpcarbon.com
03-13-2003 Over year old.
Dirty Senior Heliman Location: Des Moines, Iowa, USA
MJPI bought a set of carbon fiber fins for my Freya from MJP. They are very nice and seem to be more rigid than the ones from Mr. Carbon. Thanks for the great deal on the set.
Darren
03-13-2003 Over year old.
squirrel Veteran Location: South Whitley, IN
MJP>>
Will you cut a set of special fins for a Sceadu. A solid vertical fin and horizontal fin that would only be the left "half" side and solid. The horizontal will be mounted in a different location than stock so no holes are needed.
FinsThe fins are very nice but you should see his frames as well as they are very nice also.
Keith Lapointe
03-13-2003 Over year old.
Cy Paul Veteran Location: Toronto, Ontario
FramesAre Millenium frames available?
Any pics? Prices?
Cy
03-13-2003 Over year old.
MJPCarbon Senior Heliman Location: West Milford New Jersey
carbonI am sorry I don't know if the Milli fins fit the Futura.
Milli frames are coming very soon but not too many guys want them.
mjp
03-14-2003 Over year old.
Four_stroker Heliman Location: Oakwood GA, (just outside of Gainesville, GA}
century finsWoiuld it help if I would photocopy the fins I have and send the copy or fax it to you?
03-14-2003 Over year old.
airborneheli Heliman Location: Hickory, NC
Century finsI will send you a set if that will help!
03-14-2003 Over year old.
Lift Elite Veteran Location: Houston, TX
Mjp,
I use the Mr. Carbon "X-Cell 60" fins on my Century Raven and Century Falcon SE V2. These fit the heli nicely once you elongate the holes and don't affect backwards flight very much.
If you could make some like those that would be great! I need another set! Check my gallery for some pics of them.
03-14-2003 Over year old.
MJPCarbon Senior Heliman Location: West Milford New Jersey
LiftGonna go check your site,
Is your site Lift?
Airborne Hobbie is sending some Century samples to me.
03-14-2003 Over year old.
Lift Elite Veteran Location: Houston, TX
mjp,
You can click the "Gallery" button below and the "Homepage" one for more photos.
The fins you see on my Raven and Falcon are the Mr. Carbon "X-Cell 60" fins.
03-14-2003 Over year old.
nipmuck2 Senior Heliman Location: Massachusetts
Hey MPJ I have a set of Excel 30 stock fins I could send to you to make a pattern. Send me an email with an address.I would be interested in a set too
Thanks
Steve
