Tail_BoomStrike
Veteran
Location: Virginia Beach
| High pitch whine on my 2826/8 disappeared, when I switched to Jeti spin opto...... PWM set to 8khz, as per AXi...... Also running 2850rpm on the head with 17T pinion, governor mode (24° timing, governor sensitivity set at 2 [1-20, 20 is the lowest sensitivity])....... Total amp draw after 4min flight (timer started when the head is fully spooled up), 2400mah put back in the pack (this is with extreme loading, 4 point tick tocks, piro tick tocks, rainbow, tight figure 8 snakes, continuous piro flips, power punch outs)...... |
