Quick Worldwide
rrAdvertiser
Location: Coopersburg, PA
| We are making the final changes on the Bat 50. We found the CG was fine with the stock tail, but a little tail heavy with the CNC tail. Therefore we are moving the two aileron servos to the front and the elevator servo to the back. This will create a better CG for any tail option, and also addresses the concerns over having two servos in the back. Also the Bat 50 will be using 1.65 mm frames, not 3mm. We are also placing different aileron levers on the machine, which will create 90 degree geometry for the CCPM bellcranks. We are just waiting for the parts.
Pics of the Bat 50 flying!!
  |
