RunRyder - Pitch ranges-Benzin

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 259 ONLINE 29 EVENTS SEARCH REGISTER START HERE

1 page

346 views

POST REPLY

Autography FlightPower	.	Advantage Hobby	.	Revolution Models
	.		.

Gasser Model RC Helicopters > Pitch ranges-Benzin

JestRR
Senior Heliman
Location: Florence, Oregon

What are you guys runnin on your pitch ranges? I have a total of -9 to +12 at 100%-100%. to get 5 deg at the 3rd point/hover/mid stick I had to put 70% in. to get a normal (my normal) pitch range about -2 to +10 i had to put in:
Normal
92% 10 deg
81% 7.5 deg
70% 5 deg
55% 1.5 deg
40% -1.5

Hold
100% 12 deg
85% 9 deg
70% 5 deg
45% 0 deg
20% -5 deg

With all that but in there, now my ATV for the throttle are alot slower than the pitch. Should i reduce my ATV for the pitch,aleron,elivator??
I got the ATV's set for the Throttle to get 50% in the middle and about 90 up 87down. OR....are you guys just useing all your pitch ranges in both normal and hold at 100% and 100%???

its getting close!!!

Mike

Mike Spinner
Florence OR
NORTHWEST AERIALS/ SCALEWORKS

03-11-2003 Over year old.

HOMEPAGE

Billme
Key Veteran
Location: MS

Mike, are you running the standard 725 blades?

Sounds like you got close enough on the throttle....
In normal on the pitch...I would run -5 +5 +12 You may have to raise the hover a little more....

Don't worry about the speed difference in normal between the throttle and pitch..If you want to see it, go to idle up 1 ...
In idle up 1, you need to run the -9+5+12 if your going to 3D...
This is the reason I like the bellcranks on the CCPM, you could get more pitch out of them, and this combo needs it for 3D..
Bill

03-11-2003 Over year old.

JestRR
Senior Heliman
Location: Florence, Oregon

pitch

Bill, 725 blades
I have the CCPM frames with the servos under the main shaft. I'll raise the pitch at full and lower it at the bottom but from what you are saying, I'm in the ball park. I'm getting my ignition suppressor cap tomarow or the next day and I only have to make sure that my tail rotor is set up rught and its off to the races!!! once i get this flying , the raptor has to be picked back up and put back together!!

thaks for all your help. Most all us newbies really appreciate your help bill!!

Mike

Mike Spinner
Florence OR
NORTHWEST AERIALS/ SCALEWORKS

03-11-2003 Over year old.

HOMEPAGE

1 page

346 views

POST REPLY

CarbonXtreme	.	Midland Helicopters	.	HeliProz
	.		.

Gasser Model RC Helicopters > Pitch ranges-Benzin

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic