rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 271 ONLINE 29 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1590 viewsPOST REPLY
HeliHobby . Ron’s HeliProz South . Century Helicopter

.
.
Align T-REX 600N 700N > New Rotorworkz 2mm G-10 Frame
 
 
dva
Heliman
Location: Maricopa, AZ

The inserts are easy to intsall. Just put the frame on a block of wood and tap the inserts in with a hammer.
06-30-2008 07:32 PM
 
 
KasamaJunky
Senior Heliman
Location: North Weald, Essex, England

Quote 
Where from and how much...........if ya don't mind me asking ?


you can get the 2.0mm g10 side frames in the UK from heli.me

Here's a link.

http://shop.heli.me.uk/product_info.php?products_id=96

I just checked and they are in stock at £35.99

Trex600n pro, Trex700n pro, MiniTitan
06-30-2008 07:36 PM
 
 
RockohaulicElite Veteran - Location: Valencia, CA, USA, 3rd Rock from the Sun -
When Mandy smashes up a heli, she does it right!



I got a helicopter for my girlfriend,
It was a good trade!
07-01-2008 06:06 AM
 
 
Kona Chopper
Veteran
Location: Kailua-Kona, Hawaii USA

Ya call that a bad crash. You should see my carbon frames on my 600 Pro. Broke both side frames and the bottom stiffener. Put her in prety good. Broke the right hand frame on all 3 vertical sectons; behind the fuel tank, the part where the motor mount attaches and the front strut area. Even stripped the throttle servo when the motor got shoved upwards in the crash. Regarding the motor, the hyper head is cracked and the lovely 3dx aluminum fan fin's are bent. I had the align frame stiffeners on all four corners. Total "dumb thumb" syndrome. I got the G10 Rotorworkz frame on order and will try it out. At least the front and rear torque tube gears didn't get stripped.



big island r/c heli's
07-02-2008 06:05 AM
 
 
Rockohaulic
Elite Veteran
Location: Valencia, CA, USA, 3rd Rock from the Sun

Well let's start a crash thread!

I got a helicopter for my girlfriend,
It was a good trade!
07-02-2008 06:46 AM
 
 
Kona Chopper
Veteran
Location: Kailua-Kona, Hawaii USA

I got my Rotorworkz framed 600 almost ready to fly. The frame is very nice and very rigid. Far more rigid than the silver align frames. No instructions came with the frame set. I finally figured out what those little g-10 pieces were for that came with the kit, canopy break off rear mounts. I didn't like using the servo mount screw inserts that you press in. Why? Because why would I want to go back to using philips headed screws? I just used the align hex screws with the plastic plates for the servo's. No big deal. For $79 for the complete frame set, I don't think you can go wrong.



big island r/c heli's
07-17-2008 10:09 AM
 
 
lightningrc
Key Veteran
Location: UK

Well impressed with price for them , my N frame needs replacing bad , its got a few repairs .
07-17-2008 12:25 PM
HOMEPAGE  
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1590 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . 3D Heli Depot

.
.
Align T-REX 600N 700N > New Rotorworkz 2mm G-10 Frame
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, October 11 - 11:30 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie