rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 262 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
1 page413 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
Gasser Model RC Helicopters > what happen ?
 
 
vulpi
Senior Heliman
Location: PARIS

Hi all , i got a really weird problem here ,my gasser (XL) with G23 got a little more than a gallon trhu it so far .

What happening is at the end of the flight , when it left a bit less than 1/4 of fuel the engine start acting weird. I mean not runing clean ,it glitch like there is bubble in fuel line , is my mixture is foaming or my engine going lean ?

Sometime its about to die then run again like if it was nothing , and when that happen the tail kick in more or less violently :/

Today it happened while hovering to finish tank and engine quit with like 20% fuel left and made an auto with a full piro then landed .

This is not very fun and happen all the time near end of the tank.

Should i use a header tank or isolate fuel tank from vibration?

Thx, have fun.
03-08-2003 Over year old.
 
 
Al Magaloff
rrMaster
Location: 12,199 Posts- Enough Time Wasted. See Ya!

Make sure the fuel line in the tank is good. You won't need a header tank.
03-08-2003 Over year old.
 
 
vulpi
Senior Heliman
Location: PARIS

Thx Al i ll check all my fuel line ,do you use that yellow tygon tubing for clunk also ?
03-08-2003 Over year old.
 
 
Al Magaloff
rrMaster
Location: 12,199 Posts- Enough Time Wasted. See Ya!

Yes, use the Tygon for both. There is a smaller size, thinner wall thickness Tygon that I put inside the tank. It's more flexible.
03-08-2003 Over year old.
 
 
1 page413 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
Gasser Model RC Helicopters > what happen ?
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, October 7 - 9:52 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie