rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 409 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page1050 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > C spec in a CS
 
 
cos55
Senior Heliman
Location: blackpool, U.K. (Seattle) when I can!

Do I need to machine the engine mounts to get this motor in please??

Carl
03-06-2003 Over year old.
HOMEPAGE  
 
 
PIRO
Heliman
Location: Singapore

It fits perfectly without any mods.
03-06-2003 Over year old.
 
 
excellone
Senior Heliman
Location: Arlington, Virginia

It is recommended if you use the 11 tooth pinion and 88 tooth main gear. Some elongate frame-holes and shave frames to make it work without milling down 1.5-2mm.

http://runryder.com/showtopic.htm?t...1&topicid=37437

-George
03-06-2003 Over year old.
 
 
cos55
Senior Heliman
Location: blackpool, U.K. (Seattle) when I can!

does anyone have the pat # for the 88 tooth maingear and the 11T pinion please
03-29-2003 Over year old.
HOMEPAGE  
 
 
37 heli crashes
Heliman
Location: lakeland fla

hi, in horizons book it says .ys 80 users 8.8 gear ratio ,88 tooth main gear and 10 tooth pinion .part#jrp960002 main gear, part#jrp960321 10 tooth pinion, os91 users 8.4 gear ratio use just the 10 tooth pinion, i used just the 10 tooth with my 91os works great
03-30-2003 Over year old.
 
 
cos55
Senior Heliman
Location: blackpool, U.K. (Seattle) when I can!

88T main gear is JRP960002

The 11 T pinion is JRP960376

Carl
04-25-2003 Over year old.
HOMEPAGE  
 
 
cos55
Senior Heliman
Location: blackpool, U.K. (Seattle) when I can!

there are a few posts on RR about how much to remove off of the vigor engine mounts with the 11T pinion

They read between 1.5-2mm does anyone know the exact amount??

Carl
04-27-2003 Over year old.
HOMEPAGE  
 
 
1 page1050 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > C spec in a CS
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 6:37 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie