JadeKnight
New Heliman
Location: Los Angeles, CA
| I used the following:
1 S3154 servo (rudder)
E-Flite G90 HH gyro
AR6100 receiver
3 HS-45HB servos (cyclic)
The HS-45HB servos fit perfectly in the frame for the cyclic.
I had to dremel the tail servo mounts slightly, because the tabs on the S3154 are very small.
I also had to dremel a link ball down for the elevator servo, as it was too long and wouldn't let the arm sit fully (the ball rubbed on the servo case). It works well now, though.
 |
