RunRyder - hard to fixs Predator 60 mechanisme into bell222 scale body..

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 616 ONLINE 38 EVENTS SEARCH REGISTER START HERE

2 pages [ << < ( 1 ) 2 NEXT >> ]

1578 views

POST REPLY

A Main Hobbies	.	Boca Bearings	.	Modefo's RC Helicopters
	.		.

Scale Model RC Helicopters > hard to fixs Predator 60 mechanisme into bell222 scale body..

RUSLI GANU

Heliman - Location: Kuala Terengganu,Terenggan u.MALAYSIA -

i've found that its hard to get inside and fix.Not enough room to work out..i'm not using a scale muffler..(bullet shape).its not accurate as i hope..may be not enough tool to fix.but i happy with this scale looks like...i'm glad to share with you..any comment please do so..

fly safe and be safe..be a scaler....

Pic # 2 shows an error...its not accurate 100% that shaft and all the plate come out from its holy hole.. nearly 3mm misharp..any one xperiencing this....who??sharam sharazi..any comment..he he.

11-06-2007 05:15 AM

Airwolf crazy
Senior Heliman
Location: Lancaster, PA

Greetings,

Yes, Scale fuselages can be tough to work with when it is time for a repair or for maintaince. Typ. the mech. have to be removed to do the work needed.

Interesting paint scheme. Do you have pictures of the original?

Have you flown it yet?

Take care,
Christopher

11-06-2007 12:03 PM

HOMEPAGE

Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al

i also agree. i have gotten into the habbit of making everything easily removable and accessable because you never know what you will need to get to. i try only to mount things semi permanently. if i can bolt it on or in rather than glue it, i do that. (for the most part)

drive a rotary, fly a rotorcraft

11-06-2007 07:03 PM

HOMEPAGE

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

Greeting Airwolf Crazy,Copper Doc,
I've flown it yesterday....majestic.....I fulfill my dreams....It flown about 8 minutes(just hovering frontwards and backwards).the engine lost rpm

,,May be it hot and recognised that the muffler deflactor not in place

..its broke....i'm so lucky, but i have to modified the muffler by adding a steel pipe (5 cm) that can go in the muffler nose (no what i used??

i use my old glow starter,yes the steel that grip the plug when starting process).got to try....i'm also tie a wire to make sure it doesn't come out again...got to try.....got to try..then i report...
Its cost me 2 hours to overcome this matter...poor thing.
OK Airwolf Crazy, Copper Doctor, thanks for you concern...
i'm a newbie....Salutes to both of you..
Oh ya..the original colour schemes is out of the world..i'm arts teacher..i'm just imagine what colour and design its looks like and WaLLAA...its finish with 2K paint and pearl mix(people spray this paint to merc or porc)..its looks shinny ,smooth and clean..
its Pearl White (top),Deep Orange (mid), Clear Green (bottom)
RAG 835
TEC
and all the caution sticker under the clear.. Thanks again Chris..happy to know u.(i'm learning to write in English) sorry for

grammar........have a nice day

fly safe and be save..be a scaler...

11-07-2007 02:48 AM

BigguyOz
Key Veteran
Location: Sydney, New South Wales, Australia

Airwolf crazy, without meaning to hijack the thread, you raise an interesting issue "Interesting paint scheme. Do you have pictures of the original?"

While clearly those entering a scale competition need to base their model on a particular fullsize example, others (including me) might instead choose to pick a paint scheme based on what they would like to see a full-size one, not an existing one.

Does this lessen the scale factor?

In my case, I scanned through 1000+ pix on airliners.net and didn't find a paint scheme I particularly wanted, so am inventing one.

Tony Stott
Scenefromabove.com.au
Trex 450,
8 & 11.5m mast
AP hot air balloon
AP kites

11-07-2007 07:24 AM

HOMEPAGE

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

I agreed with you...BIGGUYOZ..People like to chose colour scheme from the real one..i go through web and searching the right one for my BELL but i'm still cannot find right one..So.

i'mjust designed my genuine one.....and i'm very happy..

thanks guys

be safe and be save.be a scaler.

11-11-2007 07:15 AM

blackite207
New Heliman
Location: Singapore

Hi friend from across the causway,
I too just completed my Bell Airwolf in a slightly different tone...Black, silver with a red stripe between the two and a pearl topcoat. I have one question. Did you experience and side to side vibration when spooling up and spooling down? I have been trying to solve this problem for the past two weeks. When headspeed it up, it is rock solid.
Terima Kaseh

11-11-2007 11:33 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

hello blackite207.....i've flown my Bell and its shaky a little while(on ground)..but solid as rock when hovering (3/4 stick)...may be its wheels was made from rubber/sintetic(got air inside) was not same as skid (solid on ground)before.Or may be your blade was not accurate or balance.or you have not properly mounted that machine on body.. i used plate to plate..as you noticed that i,m using predator 60.Its have a plate(as big wasser) that use on skid. so i put out side (bottom, same hole)to mount it.. WALLA..its fit and solid into frame..where do you fly blackite207...Bukit Batok?? Ahh...Welcome to Terengganu..Bring your Stuff.Wobble a bit..its OK... since its solid as rock on headspeed......happy flying.

11-12-2007 01:37 AM

Airwolf crazy
Senior Heliman
Location: Lancaster, PA

Greeting BigguyOZ,

Quote
While clearly those entering a scale competition need to base their model on a particular fullsize example, others (including me) might instead choose to pick a paint scheme based on what they would like to see a full-size one, not an existing one. Does this lessen the scale factor?

I do not think that it makes it any less Scale than using a real paint Scheme. The scale factor is in the work and the level of detail the modeler goes to. If this is a fictious paint scheme, I am cool with that. I have seen some pretty cool Airwolfs painted using a different color scheme.

My interest was because I though the paint scheme was neat and if it did exist on a real helicopter some place then all the better.

Take care,
Christopher

11-12-2007 02:10 AM

HOMEPAGE

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

patent our scheme...

Yupp...Chris..patents and get some bucks if chosen as paint job on scales...

..we do a short cut...but give us some bucks....then not die hard....
this Hoobything.....Easy Go easy Come...Money..................

fly safe,be save, be a scaler.

11-12-2007 03:23 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

To all Modellers Out There..watch out this EC 135 full scales colour scheme.

Yesterday....there're Sultan Cup's(Horse Endurance Race,140 to 160 km category,our #1 Ruler also participated)was held here in Lembah Bidong nearby my school...yet i'm stunned to see very impressive heli landed. Then i got the permission to have some photos and we share together the environment and skies...OK here she is

Yupp...that one was weststar logos(yellow wing)...with Malaysian Flags(Jalur Gemilang)sticker on top of it
its dark blue and silver trim..very simple but nice..
i love EC 135 scale body but the $$$$$$$$$ was too high and i cannot afford...But...i've a dreams....that EC 135 later on my shelf.hope so.

11-12-2007 07:01 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

Die hard to fixs ..at last Airborne and feel very happy....

Hello Scaler ....at last she flown very well......
Reports
1. 1st- rpm's lost...engine hot (not enough fuel comsumption)3 clips
2. 2nd- rpm's lost...engine hot --open 3 more clips.
3. OK...engine good rpm's..less vibration..

11-14-2007 04:51 AM

flyingbajau
Senior Heliman
Location: Rhode Island, USA

Looking good there cikgu. Careful, don't hit the coconut trees....

Lee

11-15-2007 02:06 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

Lee..Thanks ..its ok with coconut trees...i believe u're x Sabahan..Good for U....I'm very sick of .....you know...So Lee..don't bothered...lets flying our stuff....please give ur address..so i can visit u ..may be next year.what o you fly?

11-15-2007 02:50 AM

flyingbajau
Senior Heliman
Location: Rhode Island, USA

I sent you a PM with my contact info....come and visit anytime. I live near Boston, Massachusetts.

Lee

11-15-2007 11:41 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

Bell222 ??flying and suddenly top cover came out.oouch

Yepp ..its happen when the only screw that i tap on came out..

.oh no..that cover go around with sound..wrack..wrack.main shaft hole..minor damaged..i'm luck...hovering at 2 metres high...i put fiberglass and shape it again..today got to repaint that cover...
problem maybe;;
1. vibration---little..mid stick but no 3/4 stick
2. not enough screw.(1 screw...add to 3 screw)
3. blade not too precise..

anyone Xperience this..??
Body; FK funkey..

Any suggestion..Please..

11-19-2007 07:14 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

OK.. its repaint and ready for action.

Ok...its done...
material that i being used
i. fiber resin and cloth.
ii. fiber simen
iii car simen (fine)

repaint-2K with pearl (white colour)

All done with QC.

fly save,fly safe. be a scaler.

11-25-2007 05:42 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

fiber glass on that cover was sanded.

Its ok...and mend with QC..don't worry..its fabulous....

11-26-2007 07:54 AM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

ok at last i can show you the minor damage of top cover...its all ready repainted and i'm add 2 more screws to make sure it's secure.

11-28-2007 02:06 PM

RUSLI GANU
Heliman
Location: Kuala Terengganu,Terenggan u.MALAYSIA

tail rotor vibrated.

hello scalers..did you have this similar problem.and you fix it??.1/2 throttle.vibrate...3/4 throttle ..ok..just tail rotor..any suggestion...:

comment please...who...copter doctor..flyingbajau..tolong akuu..

12-03-2007 02:21 AM

2 pages [ << < ( 1 ) 2 NEXT >> ]

1578 views

POST REPLY

XHELI.COM	.	Autography FlightPower	.	Advantage Hobby
	.		.

Scale Model RC Helicopters > hard to fixs Predator 60 mechanisme into bell222 scale body..

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic