czolen
Heliman
Location: kalkaska, mi usa
| I started playing with my Vertol again. I've never had very much luck with it. It seems impossible to get the two multi-bladed heads to work with each other.
I could really use some setup pointers.
I am using the following
-OS 32sxh
-3 Futaba 240 gyros, on non-heading lock
-GV1 Governor
-Linkages are all set to length per the manual
Questions
-What head-speed?
-What pitch range and what hover pitch, both rotors the same or no?
-Because elevator and pitch change elevator for the rear rotor, what is the process for setting that up accurately?
-Gyro rate up and atv low or atv high and gyro rate low?
If you have been through this and can offer some insight, I sure would appreciate some help.
Just for the HELI of it. |
