rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 325 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page406 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
e-Ark X-400 - MX400 > Re : Glitching above 60% throttle
 
 
Aceface
New Heliman
Location: South Africa

Hi I have a helimax 400 and everything seems to be working fine.When i throttle up all goes well until I reach about 60% throttle and then all of a sudden the servers start glitching all of them. If i throttle down slightly It goes away. can anyone help me. Running A helimax 6 pole brushless motor tower pro esc align gyro and alighn 430 transmitter
09-21-2007 Over year old.
 
 
SLC
Senior Heliman
Location: Johnson City, Tn

Glitch

Could be the belt causing friction slaping the inside of the boom,bad bearings cause alot of radio noise, or something as simple as electronic placement. Do you have ferrite ring?If you don't get one. I was skeptical of this till I tryed it . . I cut mine from the motherboard of a old pentium computer. You can buy them from most rc heli retailers. Wrap only the lead coming from the speed ctrl to the reciver, no servo wires.
09-21-2007 Over year old.
 
 
Aceface
New Heliman
Location: South Africa

Re: Glitching

Thanks will do that

I have just baught a new esc pulso heli esc 33 A and moved it to a different location hopefully this works
09-22-2007 Over year old.
 
 
shizack
Key Veteran
Location: Augusta, GA USA

Radio interference is probably the culprit and a ferrite ring should pretty much cure it. However, if it doesn't, and you don't already have one, I would suggest installing an external BEC, even if the ESC has one built in (disable the one in the ESC). BEC's are a good thing anyway.

The more they overthink the plumbing, the easier it is to stop up the drain.
09-22-2007 Over year old.
HOMEPAGE  
 
 
1 page406 viewsPOST REPLY
Model Rectifier Corp . RCHover . RC-Direct

.
.
e-Ark X-400 - MX400 > Re : Glitching above 60% throttle
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 8:02 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie