ININVERNO
Heliman
Location: San Leandro - Ca
| hdx 500Hi guys
I gotta it.
I buy the normal one firth (I was warry about one more lost of money) and after some fly and different test I trust in it and I buy the metal head and the metal tail.
Before go foward I need inform that I like 3d fly, I fly 450 4s with neu motor (700W) 600 E and nitro with YS rappy90 carbin extreme head, than for me hely MUST be fast and quick.
The firth fly with the 500 with A3012kl and 5s 3300 22t the max head speed was 2800, STD blade (rotor and tail)... +/- 12 and 6 in the plate..... My firth feeling was silent, stable, but slowwwww...
God oor maybe excellent for people that want fly, make a gentle 3d... than I start make change.....
6s 2200 18T , speed was over 3200!!! than I slow dow at 3000, mah 425 blade and century tail blare 70mm, metal head, metal tail, mmmmmmmmm sounds better, but not enoght, thubles and roll are slowww compare at 450 or at 600.
I try change paddles (i try the gorilla 450 ligh padle) no change same, better maybe but slow, but with this new setting tic toc and rambow are ok.
Now I work in the head, they have some thinks that they don't copy from the 600 head, I wand move in the seasaw mixer arms and mlake longer fly bar (+50mm firth and see), also I find a desing error in the flybar control set, infact the stabilizer control linkage bind and they limitate the plate angel travel, I will make a small change and use the 600 desing.
One other metters, the head come with the main blade linkabe controll in right position rispect the blade rotation, in the manual they show in the left.... I try both no change in fly but like the instruction they have binding problem, I advise the set like align.
Ok Guys, my final impression, is ok, very stable perfect size, actually good rapport cost/quality, fly exactly like Hirobo, but 50% cheeper.
In tghe next week I will make the missing change, and I wish to get more minble 3d and enjoy like a creazy.
PS the metal head have very hard damper, if the head rpm slow down they start a involontary crab (alan specialty) fly. We try different head speed and must be over 2500, with 3000 / 3200 start be a nice gentle 3d machine.
I will send you more info after the modification, with some picture. |
