ssrobzoom
Veteran
Location: Tn
| Gohbee,
I have a 50 with the old style clutch which has the starter shaft made onto the clutch. I was flying this past weekend and had a bearing acting up, the one which sits on top of the clutch bell in the frames. So while I had the frames split apart, I replaced the clutch(new style with one-way bearing and not the shaft made onto the clutch), starter shaft, clutch bell and all bearing in the frames. Now when I reassemble it all without the main gear installed. I have a binding clutch bell. I checked the clearances on the clutch, while not install in the frames it free wheels fine. Can you tell me why? Everything from the fan up is new gohbee parts and now there is no free wheeling of the clutch bell. Has all the tolerances changed from part to part? Should it work just as the old parts? |
