RunRyder - Maiden break-in tommorow.

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 781 ONLINE 19 EVENTS SEARCH REGISTER START HERE

1 page

84 views

POST REPLY

Midland Helicopters	.	HeliProz	.	ZoomsHobbies
	.		.

Align T-REX 600N 700N > Maiden break-in tommorow.

electricdurango
Veteran
Location: Sterling, VA

Im gonna go do my maiden flight on my new 600N tommorow. Is there anything about nitro Im gonna need to know? I have setup numorous 450's and 600CF lipos before with great results. This will however be my first nitro heli. Heli is equiped as follows:

600N basic
metal tail box
9451's cyclic
GY611 w/9256
3151 throttle
Align 2 in 1
century pipe
os 50 hyper
TP 3400 2s rec batt
Align 600A carbons
batman plastic tail blades

Im gonna run the 50 hyper on Youngbloood 30%n 23% oil.

On breakin Im going to follow specs on hyper, but it only says to run needle 1.5 turns out for the first few flights. Then main needle adjustments slightly per tank. I have heard from other piliots..."just dont load up the disc". What else do I have to look for because I have also been told to tune it from the get go and not to load up the disc.

450se v2

08-05-2007 Over year old.

baddraptor
Elite Veteran
Location: valencia, ca- usa

I would go 2 full turns out from closed for breakin. After a 2tanks start leaning it out. Make sure after the second tank the backplate is starting to warm up, but NOT HOT.

I usually go 2 turns because some hypers are a little finicky depending on weather. So it gives you a little safety margin. If its really hot where you are you may want to go a little richer than 2 turns.

Good Luck And HAPPY FLYING

**Unattended children will be givin a shot of espresso and a puppy**

08-05-2007 Over year old.

1 page

84 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

Align T-REX 600N 700N > Maiden break-in tommorow.

PRINT TOPIC

Advertisers

Subscribe to This Topic