It took some juggling but I got it to balance with 2 3s3300 TP packs. Ready to fly weight with CNC head and upgrade with 1500w motor, 75amp ESC Gaui power setup is 5.0lb even.
I initially tested it with 2x TP 3s2400 packs. But, the duration was little over 3min so 3300s were necessary.
I use the TP3300 Also about 8 Minutes loops, rolls, flips no hard 3D. Align 75A ESC, Stock 950 motor. 5 minutes W/ airthunder 2200s You will enjoy this bird
Ron Paul 08 T-rex 450, T-rex 500
07-19-2007 Over year old.
red_z06 Elite Veteran Location: Dumont, NJ
Here is the head speed check with TP 3s 3300s. The flight time was 4:45min hard flying to 80%
The head speed with Rototech 515mm was 2690 and RCP 500mm was 2780. As you might have guessed, it smokes Trex600 6s powered with 600xl. Needless to say, Justin loves this bird.
bad attitude Senior Heliman Location: southern england
is that one wth the new metal head? I have got the standard one and I don't know if I will get the performane out of the heli with what I have got! I am runnin 15 degrees of pitch each way which i am really impressed with!
