Rob_T Elite Veteran Location: Tualatin, OR - USA
| Is this an Eco or a Piccolo?
If it's a Piccolo, the problem is very likely adjustment of the mixer pot, need to back it down a bit!
If it's an Eco, you may need to adjust the linkage to the tail rotor to reduce the pitch when the servo is at neutral. If your gyro is a HH type, make sure you do not have revolution mixing enabled on your transmitter, if it's not a HH type then try reducing the amount of revolution mixing.
Rob Eco8, Piccolo Fun, Shogun, HB Elite CP, Trex 450XL CDE, Swift |