rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 272 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page827 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . Heli Wholesaler

.
.
Crashed? Discussion and Photos > 600N dirt nap
 
 
getfurious
Veteran
Location: Exeter, NH

Nice day of flying, the wind was a little on the high side, but whatever.
Finally got a friend out to the field that has not flown since Oct. And on the 2 flight he plows his Raptor 50 in hard. Enough that it would be easier to buy a new kit.
So, unphased by his crash I take my 20 flight old 600n up and start beating on it. Get about half way through the flight doing some low stuff and the elevator stops working pointing straight at the ground. As soon as I could hit throttle hold it plows into the ground nose first at about a 80 degree angle. It hit hard enough to bend the tail boom about 75 degrees. It also sent the battery (2 cell 2100) with the entire receiver mount through the fan case and fan.
I hope the black g10 frames come out soon!!! Do not what to spend $130+ on carbon frames. I will try to get some aftermath pictures up tomorrow.

I am still trying to trace down the cause, but I am leaning towards that it is bad connection on an extension, or it came out of the reciever completely, or ???.

Damage so far:
The "regulars"
All the gears
frames
canopy
fan set
gov. sensor
fins
receiver tray
battery

So now when somebody else crashes a heli... I'm packing up!!

Don't you just love this hobby??
Paul

A skilled pilot without flight discipline is a walking time bomb.
07-01-2007 Over year old.
 
 
DS 8717
rrProfessor
Location: Here wishing i was somewhere else

The G10 are carbon on the outside.DOUG
07-01-2007 Over year old.
 
 
airboss
Elite Veteran
Location: OC ,california

not a good day.i hope you locate the problem before your next flight.

OCRM....flyBlackstarr.org.
07-10-2007 Over year old.
 
 
getfurious
Veteran
Location: Exeter, NH

I believe the Align 6A Regulator wires came loose causing a reset. Because I ran the servos again and only when I fooled around with the regulator did the servos stop working. So I am going to do the mod as suggested in the 600N forums.

I got some nice G-10 frames from Helidirect, although they are not as nice looking as the carbon they are a bit thicker and cost about $80 less.
I got most of it back together now and of course forgot to take some pics.

Paul

A skilled pilot without flight discipline is a walking time bomb.
07-11-2007 Over year old.
 
 
1 page827 viewsPOST REPLY
3D Heli Depot . JR-Spektrum . Gyro Hobbies

.
.
Crashed? Discussion and Photos > 600N dirt nap
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 23 - 9:29 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie