I can't find a place to put on on-off switch on the frame. I think I might go to the froemco regulator with the pin and flag switch. Any ideas as where to mount them? Thanks John.
06-28-2007 Over year old.
rob_k Senior Heliman Location: Denver, CO
I mounted mine on the frame under the canopy on the needle side with STRONG 2 sided servo tape. I have the fromeco but, not the pin switch. I am going to go with the new 2 in 1 reg later this week.
06-28-2007 Over year old.
HATORI Heliman Location: uk
i glued mine to the front of the radio tray easy access from the hole in the bottom of the canopy
06-28-2007 Over year old.
RCHeliJim Elite Veteran Location: Orem, UT USA
Mine is double side taped to the top of the front servos - you can reach it with the canopy on from the top. I may move itto another spot later on - but it should be fine there.
I secured mine to the underside of the bottom plate opposite of the muffler with epoxy and zip ties.
I'd rather be flying
06-28-2007 Over year old.
raptorheli2 Elite Veteran Location: rip off britain and no changing it
the old guy, that has to be possibly the worst place other than next to the exhaust to put a switch. i wouldn't leave that there if you can mount it elsewhere.
-5853.jpg)
