frankg11 Veteran Location: Bellevue, WA
| my 3d learning schedule....
proficient in all orientations..
Fig 8's both directions (away from flight line, to flight line) Upright and Inverted Standard aerobatics.. Loops (Staionary)(Climbing and Decending) Rolls (Staionary) (Climbing and Decending) Imelmans TickTocks (Climbing, Decenting, traveling, etc.) etc. Slow Piros clockwise counter clock( in all orientations and in same spot) Autos everywere any direction and orientation backward flying ( 8's in both directions) Invert (8's in both directions and forward, Backwards)
Do all the basic stuff in all orientation left and right sides of you, etc. Get this stuff down first, then go for the agressive 3d stuff.
It's a lot of work and I have been told to fly the sim and burn fuel and get this right. It's working and I am happier flying instead of crashing.
FWIW: I pushed too hard early on and stuffed 3 helis in 3 days and stuffed a couple of synergy's trying to much to early.
Went back to the basics and found out that my skills were weak in several basic areas, not that those skills are more rounded it's easier to go to more stunts.
Good luck, and take the time to get the basics down cold, will save you $$$ in the long run. |