Vance
Veteran
Location: York ,PA
| OK maybe one of you G2 gurus can hepl me out. I am using G2 with the interface with a JR8103. My problem is that When I make changes on my radios pitch curve it doesn't affect the pitch as seen in the advanced nav guides. Yes I have the box checked to use my own radio under the edit aircraft screen. I was getting 98º of top end pitch!!! and my servo output on collective was at 873% !!!! I did several reboots and that didn't help. I then shut everything down and did a model reset on the transmitter and that fixed the 98º of top end pitch, it is now at +11º(Low pitch was -11º) after doing another transmitter calibration. I tried adjusting the pitch and throttle curves in the edit radio screen and that didn't help either. BTW- this is with the Add on disk #3 Raptor 60 model. I tried changing my ATV's on my radio and that didn't do it. I didn't have this problem for the last few days. I just installed G2 a few days ago and I havent had any other problems.
Any suggestions
Thanks
Vince D |
