Phil Cole Veteran Location: Redwood City CA
| I use a Hitec 335 for field charging. Seems to work OK. The four cell charger output isn't all that fast, so I usually use the high power charger on my receiver batteries.
The peak detector sometimes triggers prematurely if I charge too fast. 1 A seems to be about as fast as I can charge a 1400 mAh pack and reliably get it fully charged in one go. The voltmeter holds the peak voltage reading, and I know roughly what it should be, so it's easy to tell if I got a false peak. This charger will also tend to overchage NiMh batteries in some cases.
The CG 225 has a single output and only does up to eight cells. This would be enough for Tx and Rx packs. |