RunRyder - Servos for Gohbee 90?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 296 ONLINE 20 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

1357 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

Gohbee Aviation Stinger 30-90 > Servos for Gohbee 90?

WJackson
Key Veteran
Location: Smyrna, Delaware

GO WITH 6965'S . SERVO CITY HAS THEM FOR 54 A PIECE THATS A STEAL!

Bill Jackson

06-12-2007 Over year old.

FLYINFOOL
Veteran
Location: Cudahy, WI

That is a steal on a great servo.
There goes my budget again.

Jeff Borowski
Gohbee Field Rep
0133TD

06-12-2007 Over year old.

HOMEPAGE

WJackson
Key Veteran
Location: Smyrna, Delaware

i am SSSSSSSSSSSSSSSoooooooooooooooooooooo tempted to bust 5 of 'dem bad boys , what 250 in servos from top to bottom. cant beat that

Bill Jackson

06-12-2007 Over year old.

dialarotor
Veteran
Location: Traverse City, Michigan

CIRRUS 701, 702, 704 servos

http://www.hobbypeople.net/gallery/440704.asp
http://www.hobbypeople.net/gallery/440702.asp
http://www.hobbypeople.net/gallery/440701.asp

go to WWW.HOBBYPEOPLE.NET and look at the CIRRUS servos for
your STINGER 50 and STINGER 90 application.

The CS 701 IS $19.99 and gives you 126/144 inch oz. of torque
at .15/.13 SEC speeds. I use these on Raptor 50, Caliber 50,
Tiger 50 helis and Concept 60 SR II's. Tough karbonite gears.

I will use the CS 702 and CS 704 servos for my Raptor 70, and Stinger 90. Look at the speeds. CS 702 is HIGH SPEED a t .10/.08 and big inch ounces. Metal gears

CS 704's are plenty fast and hugh inch ounces of torque with metal gears. .17/.15 sec speeds with 181/195 inch ounces of torque at 4.8/6.0 volts.

702's and 704's available for $30 bucks

Great value and strong even though they aren't digital servos.

I have been using these for over 10 years.
Even the CS601 is a strong value servo good enough for 30 size helis at only $9.99. Been using them for throttle servos before I started running Throttle Jockeys.

Carbon fiber paint stick maker

06-19-2007 Over year old.

HOMEPAGE

shanee86
Senior Heliman
Location: Oklahoma City, OK, United States

A update I been taking awhile to get this chopper going for many reason's one being I am making it a gas heli. But anyway I have the radio gyro and gyro servo one Hs-6965 servo the gyro is the gy401 and the BME 90. I am hopping to get this going soon still need some servo blades and maybe some gears. But anyway I am wondering can you mix servo's I thought for sure you could for like throttle then cyclic but what about like left and right should they be same? Also anyone else use the servos in the above link and are they good? Also don't see the special at servo city?

My rc site shanesrc.com

07-25-2007 Over year old.

HOMEPAGE

FLYINFOOL
Veteran
Location: Cudahy, WI

On the Stinger 90 you can mix servos.
It is only on an eCCPM heli that the 3 (or 4) swash servos must be matched.
I would put the strongest one on the collective and the weakest one on the throttle.

I have never used the Cirrus servos so I can't help you there.

Jeff Borowski
Gohbee Field Rep
0133TD

07-25-2007 Over year old.

HOMEPAGE

shanee86
Senior Heliman
Location: Oklahoma City, OK, United States

I have a question if I only have one servo that is the fastest besides the rudder servo what should I use it on? I was thinking maybe collective what do you all think?

My rc site shanesrc.com

07-29-2007 Over year old.

HOMEPAGE

TYREE
Veteran
Location: Sonoma county

I think you would want a servo on the throttle that's a little faster than the one on the collective...
power before demand...

07-30-2007 Over year old.

TYREE
Veteran
Location: Sonoma county

Shanee....

For a less expensive servo that's decent...

At this point(Servo City is out of the HS-6965's)
an HS-5625MG on 6v should work fairly well.
$47 on E-bay.

Ty

07-30-2007 Over year old.

shanee86
Senior Heliman
Location: Oklahoma City, OK, United States

Why would you say the HS-5625MG wouild farely well? Because they should work just as good if not better then ones I was looking at. They have good enough torgue and a good speed even at 4.8?

My rc site shanesrc.com

08-04-2007 Over year old.

HOMEPAGE

TYREE
Veteran
Location: Sonoma county

Hey Shane.....

The one's I mentioned are digital, so should center pretty good.
They however are a little bit on the slow side compared to what most guys are running on 90's ..... even at 6v. Their torque is fine and they are recommended by Hitec fore Heli applications....

So...they would be a decent servo....just a little on the slow side...unless you're a pretty good pilot....you may not notice the speed thing at all.

Hope that helps....

Ty

08-04-2007 Over year old.

2 pages [ << < 1 ( 2 ) > >> ]

1357 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	Heli Wholesaler
	.		.

Gohbee Aviation Stinger 30-90 > Servos for Gohbee 90?

PRINT TOPIC

Advertisers

Subscribe to This Topic