Rob_T
Elite Veteran
Location: Tualatin, OR - USA
| Yes the bearing seems to be glued in to those booms. I have pushed one out in the past, but it's not easy and there is probably some risk of screwing up the boom in the process. When you get it out, you will have 2 small (1mm) holes in the boom where they inject the glue.
My technique was to use a rod that was a sliding fit in the boom and long enough to reach all the way through. I held the rod fixed vertically and tapped the boom down onto the rod, just holding the boom in my hand - not using a hammer or anything else that might damage the boom.
Rob
Eco8, Piccolo Fun, Shogun, HB Elite CP, Trex 450XL CDE, Swift |
