Madman Veteran Location: Roswell, GA
| What are you running for tail servo with the 502? If it's a 9205, you still will have issues with full 6V as I've tested them and know. If it's 9251, 9553 those are digitals and you really SHOULD run them to get the full performance out of the 502 unless this is in a scaler and not to be 3D'ed.
You CAN get away with it and it will mean a strong, quick-ass heli but I would still recommend going to MAXX products and regulating the 5 cells down to a steady 6V. That way, when you start flying and the pack is showing 7.3 volts or so and later at the end of the day when it is down to 5.8 volts, you won't notice any difference and neither will your servos. With the regulator, it will always be 6V. |