hobeeami
Heliman
Location: mt.sterling ky
| im still confused as to how far i should set the limit on the gyro.i have the left and right sides of the atvs at 100%.when in normal mode and i adjust the limit pot to where theres no binding,and you give it full left rudder the rudder barely moves in that direction while full right the rudder moves considerably.is this normal?everytime i had it in hh mode today the tail wanted to piro to the right very fast.but in normal mode the tail stayed fairly steady.whats up.i have the 9253 digi servo.in the instructions it says to leave the delay pot on 0.has any one had to adjust this above 0 for their 9253's?ive flipped the gear switch on and off 3 times below the 1 sec intervals.still no change.
also it says the rudder has to be in the neutral position when turned on.since the stick is spring loaded shouldnt it always be in neutral anyway?does it matter what position the throttle is in when you first turn it on in hh mode.in other words is neutral considered being,centered on rudder and centered on the throttle. |
