Ken B
Elite Veteran
Location: Phoenix, AZ
| Try thisIn the Shuttle the skids are real sensitive and you will see vibration.
Some things that might fix your problem:
Balance the Head, main blades, fan & Clutch assy, tail rotor.
Watch that head RPM, I found that backing my throttle curve back to 40-45 in the middle slowed the head down which took out the high freq vibs.
Engine tuning; a poorly tuned engine will increase vibration problems too. If the engine is new, give it a few flights (10) to get broke in.
Yes, you can install the GY401 with the above problems. It will do a fairly good job. But if you have lots of vibration and bad running engine then it will wag. If you can get those skids to smooth out you will have it licked.
Ken B |
