rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 848 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page510 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
Computer Flight Simulators > Tail Problems with CSM V10 & FF8 Super
 
 
Raptorite
Senior Heliman
Location: Wiltshire, UK

Hi,

I have been suffering for a while with tail control problems in CSM V10 using a Futaba FF8 Super TX.

The problem is that no matter what I do with the Gyro gain settings in the TX, the tail will always rotate, which gets progressivly worse with increased climb out rates. Also if I hit the throttle hold, the tail will rotate in the opposite direction.

I have assumed that it must be to do with the gyro gain, but I have now tried the whole range of percentages in both HH and normal modes, and nothing appears to work.

Any ideas would be greately appreciated !!!

Regards,

Peter.
01-25-2002 Over year old.
HOMEPAGE  
 
 
vetrider
Elite Veteran
Location: Daleville, AL (Ft.Rucker)

You probaly have the REVO mixing set to work on your FF9. The defalt is for it to be ON. So you have to go into the menu for it and turn it off.

Nolan Manley
RREMODELS, KBDDintl, Magnum Fuel
Stratus, ODIN, Knight3D, ATOM 500, TREX 700N.
01-25-2002 Over year old.
 
 
Raptorite
Senior Heliman
Location: Wiltshire, UK

FF8 Super TX

Hi Vetrider,

Thanks for the info, but I have an FF8 Super, not an FF9, will that be the same?

I'm not sure that revo is set on in this instance, I will check though.

Regards,
Peter.
01-25-2002 Over year old.
HOMEPAGE  
 
 
1 page510 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
Computer Flight Simulators > Tail Problems with CSM V10 & FF8 Super
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 8:21 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie