Thomster
Heliman
Location: S.E. Ohio
| My first post so here goes: Been into the rc airplane hobby for over 30 yrs. but just started heli's about 3 yrs ago. I currently have a Corona fixed pitch, EF Blade CX and some limited stick time & experience with a EF Shogun. Still learning much of this helicopter stuff...
I'm finally decided to complete a eVoyager that I've had sitting in the box for a couple of years. Pretty much stock however I've upgraded the motor too the Hacker C40-8L and a Hacker M 40 B Heli ESC. & 16t pinion. I also have the Hacker Master Prog Contol Box for programming the Hacker ESC.
My questions are:
(1) I've have the throttle set at 75% and my headspeed tachs at appx 1750 rpm. Should I increase the headspeed?
(2) Should I setup the esc for the governor or normal type.
(3) If I use the governor setting should I then change the throttle type from automatic to the fixed type. The Hacker Prog box has options if it's adjusted to the fixed mode for the ititial and final MS setting. How does one determine the correct ms settings.
Any help or recommendations would be appreciated.. |
