Gary Hoorn
Key Veteran
Location: Annapolis Maryland USA
| Dewey,
I am sure you have followed some of the threads here about the DX7 so this may be redundant. Make sure and bind the 6100 before you begin to setup your Heli. After you have gotten everything setup bind again with the throttle in your desired failsafe position. To avoid the problems some are reporting when you get ready to range check turn on the transmitter, wait at least 5 seconds and then turn on the receiver. Do not depress the bind button during the power up phase of the transmitter unless you wish to bind a receiver. Range checks are performed by first verifying proper operation and then pressing the bind button to reduce Tx output. Enjoy, they are great radios. I went today and flew in the cold and snow with mine 
Gary |
