godadd
Heliman
Location: NC
| OK, I know all the threads and the manual says to install this gyro with the label upside down on the X3D but on mine it didn't work. I made sure the rudder servo moved in the right direction with the stick and all looked fine. Tried to test the beast and all I could get it to do is spin around and around on the ground (at least I could tell it to spin CW or CCW). Tweaked all I could think to tweak to no avail. Finally set it on the bench and checked to see what direction the gyro moved the servo when I turned the heli CW or CCW with my hand. Sure enough it was moving it the wrong way. Flipped the gyro over with the label right side up and it trimmed right out.
Go figure  |
