RunRyder - piccolo pro

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 648 ONLINE 38 EVENTS SEARCH REGISTER START HERE

1 page

985 views

POST REPLY

GrandRC	.	CanoMod	.	Futaba-RC
	.		.

e-Ikarus Piccolo-Eco 8/16 > piccolo pro

robxlgas
Heliman
Location: east sussex

hi how much movement do i need on the swashplate do you need more or less than a 60 or 30 size or the same?i have crased twice in 2 days!!! 2 sets of blades and 2 main shaft!! i have never ever bent a heli so much in such a short time!! is it ok for the tail not to be rototing right up to take off? what is the sound if the rotors at the right seed is it farster then you think being so small.the larst hover it lifted off and then when off all over the place and i could not get it undercontrol.help before i jump on the thing!!!! i think it might be the head speed but it did seem to be very farst my be not farst enuff!!.

12-28-2002 Over year old.

donlynn
Key Veteran
Location: New Zealand

Gidday
Ask these questions on the ikurus board
I dont know about the pro but the picoclo is more difficult to hold a hover than a raptor 30. They are a good heli though !! keep at it, are you using training gear?
Good luck Regards Don

12-28-2002 Over year old.

robxlgas
Heliman
Location: east sussex

thanks i will try the ikarus site.it sould hover like a eco 8 i have one of them and that is grate almost better than my xl gas!! i hope the piccolo works as well thanks

12-28-2002 Over year old.

Jaroslaw Hajduk
Heliman
Location: Poland

Hi

Very little movements of swashplate!!!, just about 2-3 mm (1/10 of inch)on pushrods.
First you have to trim Piccolo Pro very carefully, I made this holding Piccolo in my hand (without HH modul).
Add a 15"long balsa sticks to skids too.

Regards
Jarek

12-28-2002 Over year old.

1 page

985 views

POST REPLY

A Main Hobbies	.	Boca Bearings	.	Modefo's RC Helicopters
	.		.

e-Ikarus Piccolo-Eco 8/16 > piccolo pro

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic