Razmo
Key Veteran
Location: Chicago
| Guys,
I've collected an entire set of Duzi upgrades over the last year or so and just getting to the build in a new X3D.
While using the Duzi Head in conjunction with his BellHiller mixer I get binding. The Duzi head is top notch quality and rotates freely as well as the mixing arms when they aren't attached to the blade grips. I'll do my best to explain it. I can only guess Duzi has know about this problem and will need to send me some shorter spacers.
Anyhow, in order to use the BellHiller mixer, I had to remove each ball (on the blade grips) and replace it with a tapped spacer. Once I slip the mixer arm over this spacer (with the flybar assembly in place) to secure it in place the trouble begins. The spacers are just a tad bit too long which is adding pressure to the mixing interaction causing it to bind. Has anyhone else had this problem?
I'm also having a hard time understanding how he wants E020 of the the adjustable link (that attaches to the top of the swashplate) to connect to the end of the mixer arm? Is there are diagram error or does he really want you to pass the screw through the entire bearing before screwing E020 into place? Do you know what I mean?
Raz |
