RunRyder - help with lipo what size

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 692 ONLINE 46 EVENTS SEARCH REGISTER START HERE

1 page

721 views

POST REPLY

Ace Hobby	.	Esprit Model	.	Thunder Power RC
	.		.

e-JR Voyager E > help with lipo what size

ka244mog
Heliman
Location: uk // newcastle upon tyne

hello all i have a hacker c40-9l and cc 45amp esc .

i have got my hands on a tornado li-poly 3200 11.1v 3s1p
with a constant discharge of 20c and a 30c burst .

i have main cogs from size 14 to 17 ..

what sort of flight time will i get from this ,,
or is the battrie to small .

any one help ..

yours dave ..

12-20-2006 Over year old.

jnngill
Heliman
Location: Castle Rock,Co - usa

The Battery is fine

The battery should be able to draw about 64 amps. As far as flight times that really depends a lot on how you fly. But I would expect between 5 to 8 minutes.

12-21-2006 Over year old.

ka244mog
Heliman
Location: uk // newcastle upon tyne

re battrey

thanks for the help had heli in a hover today ..

can you tell me if i was to buy a bigger battrie for a longer flight time what would you suggest ..for scale flying .

i have been told to go for 4 s pack but i can only find them in 14v size

would this dammage my esc or moto ..

thanks dave ....

happy xmass and best wishes for the new year ...

12-22-2006 Over year old.

Ralphw
Key Veteran
Location: Spring, TX

With the motor you are running a 3s3p 6000mah pack should do really nicely. I flew the VE with an 8L motor and used a 8000mah pack (early version w/ low C rating). I found I was could get an easy 20 minutes out of it with moderate flying. A 6000 is significantly lighter and (with the higher ratings available today) should provide all the power and duration you want.

Ralph W.
"Life's Short, Fly Fast"

12-22-2006 Over year old.

HOMEPAGE

1 page

721 views

POST REPLY

Real Raptors	.	Mikado Modellhubschrauber	.	GrandRC
	.		.

e-JR Voyager E > help with lipo what size

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic