Akira
Heliman
Location: Osaka-Japan
| Hi, Xircom,
The bearing set with a thrust bearing is not the "Lower" main
gear case but the "Upper" gear case. For the "Lower" gear case,
you can use either one of the the stock ones or K&S UG main gear
case set A.
It's true that the thrust bearing case is too thick, and when
used as the "Upper" gear case, the top part of it would hit the
lower part of your swashplate at the lowest pitch as your swashplate
responds to your ailron or/and elevator stick movements.
Akira |
