RunRyder - synergy build checklist

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 409 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

435 views

POST REPLY

Advantage Hobby	.	Revolution Models	.	CarbonXtreme
	.		.

Synergy R/C Synergy N9 > synergy build checklist

inkspot1967
rrProfessor
Location: cranston ri.

so far these need to be done

tt collars part# 115-217 need to be flipped around per Todd Bennet

part# 109-357 brass spacer bag# 11 on page a17 should be 7mm long check it if its 5mm long switch it with bag #15 it will be in there and use the other one on the tail rotor bell crank it should be 5mm there

3 ball links on swash page# a21 should be 3 more turns out to start and the 2 long ones up from swash 3 turns in

washout arms cut outer hole off

if i missed anything chime in guys

Trex700e Ray Nemovi's kit & Tyler Bonta Head
Rave Flybarless
WENZEL CANOPY
Team TomTom

09-15-2006 Over year old.

Chuckie
Key Veteran
Location: Crofton Maryland, MHA member

Just got word from Jason and he says the direction of the collars are correct in the current manual.

Charles

Please stand by for faster service!

09-15-2006 Over year old.

raptorheli2
Elite Veteran
Location: rip off britain and no changing it

so does the end with the grub screws go against the insert now and not away from it? i have mine apart and wonder what way they should be when rebuilding.

also, cut the outer hole off the washout....why don't they put in a metal anti rotational guide so we still have some mixing options? MA one will be going on me thinks.

cheers

www.waterfoothelis.com

09-15-2006 Over year old.

HOMEPAGE

inkspot1967
rrProfessor
Location: cranston ri.

well this sucks jason says its right in the manual and todd says flip them mine are flipped already so thats were it stays

Trex700e Ray Nemovi's kit & Tyler Bonta Head
Rave Flybarless
WENZEL CANOPY
Team TomTom

09-15-2006 Over year old.

Chuckie
Key Veteran
Location: Crofton Maryland, MHA member

raptorheli2,

Regarding the washout arms it's the possibility at full pitch and full right and left cyclic that the tip of the arms will contact the swashplate where the screw for the anti rotation mounts. If you run +-14 pitch and +-9 cyclic the arm will hit but for normal setups +-10 and +-6 it should clear. Its best to check for binding to be sure.

Charles

Please stand by for faster service!

09-15-2006 Over year old.

raptorheli2
Elite Veteran
Location: rip off britain and no changing it

i have modified my guide not to flex as i assume most cases of the washout catching (the ones i know about anyway) the guide is because the guide moves slightly under load (it is flimsy if you move it) so that i have sorted.

i know there is also instances of the washout arms clipping the inner swash where the left and right ball links attach, a dremel will fix that.

fixing it from clipping the front is going to be tricky, i'll have a look at that but i really can't see mine doing that as i only run 10 on pitch.

cheers

www.waterfoothelis.com

09-15-2006 Over year old.

HOMEPAGE

Droid
Elite Veteran
Location: Deep down in the Southwest- UK

Funny i mentioned that 12 days before chuckies' post but hell what do i know, and here was me thinking i'd cut 5mm off my washout arms for the sake of it.

Quotes may have been changed for my own amusement

09-17-2006 Over year old.

1 page

435 views

POST REPLY

Midland Helicopters	.	HeliProz	.	ZoomsHobbies
	.		.

Synergy R/C Synergy N9 > synergy build checklist

PRINT TOPIC

Advertisers

Subscribe to This Topic