rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 702 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page463 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
e-MS Composit Hornet > motor pinion for my Hornet X-CP
 
 
Ruby
Heliman
Location: Germany

where can I get a metal pinion for a hacker B20-26S (2.3mm shaft), 64pitch and 14T with set screw? I checked helihobby, fxaeromodels, deetee and tower. Anyone could guide me in the right direction? I hate plastic pinions



thanks in advance
Ruby
08-14-2006 Over year old.
 
 
DarkHorse1
Senior Heliman
Location: Gloucester UK

Sorry I can't find one for you...
either use a push fit/CA/solder from this list of suppliers
Or drill out a 2 mm grub screw pinion to fit.
08-15-2006 Over year old.
HOMEPAGE  
 
 
Ruby
Heliman
Location: Germany

thanks DarkHorse

I order two from Allrc today. great website!. thanks again. FYI I'm almost done with my electric brushless tail conversion on the Hornet X-CP. I had to give up on the shaft pinion stuff. I really liked it when it worked but for the flying that I do with these micro Heli after all the money spent on electronics the BL tail will do just fine. I already have a Piccolo like this and it flies decent to me. I was contemplating that Heli direct belt drive kit but by the time you are done, its no longer a Hornet, I am trying to stay true to the badge. If I wanted a Blade, I would have bought a Blade.
08-16-2006 Over year old.
 
 
DarkHorse1
Senior Heliman
Location: Gloucester UK

A direct drive tail with CP managed tail blades should be as good as the stock tail drive shaft if the centre of gravity can be worked out with a tail motor. Might even be more efficient and flexible as you can dial in any tail RPM you want.

Keep us posted.
08-22-2006 Over year old.
HOMEPAGE  
 
 
1 page463 viewsPOST REPLY
Midland Helicopters . HeliProz . ZoomsHobbies

.
.
e-MS Composit Hornet > motor pinion for my Hornet X-CP
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 4:33 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie