RunRyder - 710's on a avant fx with freya head ?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 507 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

289 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

Avant Aurora - EFX - FX > 710's on a avant fx with freya head ?

LoganAZ
Senior Heliman
Location: Phoenix. Arizona, USA

I have radix 710s but the head on my avant is pretty large so is it going to be alright or should i go with 690s ?

07-31-2006 Over year old.

Inspiron
Senior Heliman
Location: Las Vegas

I agree, vblade 690 with 95 is best setup on avant fx..!!

07-31-2006 Over year old.

LoganAZ
Senior Heliman
Location: Phoenix. Arizona, USA

so can I run 95 tail blades with 710s until i can get some 690s ? or do i have to run 105s with 710s ?

07-31-2006 Over year old.

matman
Veteran
Location: White Oak Texas USA

I don't see why you would have to run 105s with 710s. You should be able to use 95mm tails for clearance but I am not sure it will work with the Avant FX.

"Respect my Authoritiah!"

07-31-2006 Over year old.

Jafa
Elite Veteran
Location: Sydney, Australia

Your main and tail blades are likely to connect
On the Avant FX you can't run 710 mains and 105 tails
That combo is for the EFX with a Evo head only
as the Evo head has a smaller blade bolt to blade bolt distance
but I think they only use 105 tails with 690 blades on the Evo

690mm and 95mm is what you need to run on the Avant FX
(Plastic Hirobo head or XSpec head)

Lepton | TRex600Nitro | Sceadu | Freya | Avant | Predator Carbon Max

07-31-2006 Over year old.

Chopper
Key Veteran
Location: Stow,Oh- oops, I mean St Louis, nope Stow again

680 blades would be best. 95 mm on the tail. With the 710 blades, you CAN run with some overlap, but you have to be careful. If you want to make a few easy passes and easy loops and stuff, go ahead with the bigger blades, but 680 blades is what you want for that head.

Paul Soha is a Futaba Team Pilot , Aurora Team Pilot, Wildcat Team Pilot, SAB blades

07-31-2006 Over year old.

Heli-boy
Heliman
Location: Midlands, Ireland

I would agree with Chopper. I have been running 690 V's for a while on my Avant FX with standard Freya head, runs good but quite easy to over-pitch on manoeuvres, I thought that 680 V's would be best for all but the most skilled pitch managers! . I am planning to try Radix 690 which I am fitting in next few days. 95 tails are perfect.
It probably goes without saying but stick in the harder CX dampers instead of standard Freya damper rubber which is waaay too soft. So soft that it will cause boom strike on hard 3D.

07-31-2006 Over year old.

HOMEPAGE

1 page

289 views

POST REPLY

Next D	.	Fast Lad Performance	.	Ace Hobby
	.		.

Avant Aurora - EFX - FX > 710's on a avant fx with freya head ?

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic