JonMann
Senior Heliman
Location: Clayton, CA
| First, I've posted this on ezone as well so I apologies to those who are seeing this for the second time, but I have become desperate!
My Schulze 35Ho will not allow me to program the "operational mode" to one of the govenor choices. I use a Fut9c radio, PCM rcvr, uBEC (I have tried a FM rcvr, eliminated the uBEC and tried a seperate battery). When you program the operation mode you need to go to mid-stick instead of full throttle for motor mode. It appears the ESC never sense the mid-stick position. I have tried every setting throttle curve setting posible, if it is too low (below 46%), it seems to ignore the programming mode and just tells me what motor mode it is in, get the throttle to high (above 46%) it goes into motor mode programming. I have tried 140 ATV's, different channels, everything I can think of. Motor mode programming works great.
Any other suggestions? Who/where is the best place to get support from Schulze?
thanks - jon |
