RunRyder - Avant EFX which SAB blades

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 720 ONLINE 46 EVENTS SEARCH REGISTER START HERE

1 page

473 views

POST REPLY

Midland Helicopters	.	HeliProz	.	ZoomsHobbies
	.		.

Avant Aurora - EFX - FX > Avant EFX which SAB blades

Palo
Heliman
Location: Slovakia

Which are better blades for Avant with Freya EVO head for light 3D
YS91 8,45 gear
0221 680mm 62mm chord or 0223A 710mm chord 62mm or 0224 710mm 65mm chord

07-13-2006 Over year old.

dogg5306
Senior Heliman
Location: Brussels, Belgium

On an Evo90... 690mm for main blades and 95mm for tail blades is the maximum you should get to avoid issues

____________________
Miniature Aircraft Stratus
Avant Aurora
2nd Aurora or(and) Vibe 50???

07-13-2006 Over year old.

HOMEPAGE

RSA
Senior Heliman
Location: Phnom Penh

on the EFX, you can go 105mm tail 710 mains, no problems... btw Sabs, Vblades, and Radix are all good, you cannot go wrong with these blades... GOOD LUCK

07-14-2006 Over year old.

iachia
Veteran
Location: Milan, Italy

Quote
on the EFX, you can go 105mm tail 710 mains, no problems

Only if you have the programmable head wich is shorter than the original hirobo with the EFX mods.
Anyway I've tested 105 tails and I think they're really too big.
The best combo IMO is 710/95.

You can try the new SAB 225 wich have the same chord as the radix and fly really good.

_____________
Synergy N9

07-14-2006 Over year old.

HOMEPAGE

Palo
Heliman
Location: Slovakia

iachia

what is lenght of chord SABs 0225
they are not on http://www.sab-compositi.it

Palo

07-14-2006 Over year old.

Chopper
Key Veteran
Location: Stow, Ohio, oops, I mean St Louis, MO

Blades

I run 710 blades with the new head. I would run 680s if I had your head and engine though. You can swing the 710s, but personally, I think you should go with the 680s. You still get excellent performance with the 680 blades, and they consume just a bit less power.

Paul Soha is a Futaba Team Pilot , Aurora Team Pilot, Wildcat Team Pilot, SAB blades

07-14-2006 Over year old.

Palo
Heliman
Location: Slovakia

Paul,
what SABs blades have you been flying ?

Palo

07-14-2006 Over year old.

Inspiron
Senior Heliman
Location: Las Vegas

The best combination is
V-blade 680 with v-blade 95

07-14-2006 Over year old.

carcrasher
Key Veteran
Location: east coast

Sab's 680's fly really good with your head or 690 v-blades. I haven't tried radix 690's. I have the radix 710's on the Avant w/ the programmable head.

07-14-2006 Over year old.

Chopper
Key Veteran
Location: Stow, Ohio, oops, I mean St Louis, MO

I have been flying the regular 62mm chord 710 blades at 172 grams (or so.) Your head is a slight bit wider, and your engine has just a bit less power. You could fly the 710,s but there would be no reason to do it. You can't do anything with the 710s that the 680s won't do. The AVANT is light enough that the 680s do just fine.

The wider chord blades eat a bit more power than the older (regular) blades do. For my flying style, the 62 mm blades do just fine.

Paul Soha is a Futaba Team Pilot , Aurora Team Pilot, Wildcat Team Pilot, SAB blades

07-14-2006 Over year old.

iachia
Veteran
Location: Milan, Italy

SAB 225 are 63 chord
224 are 65
223/A (JK) are 62

The 225 are fairly new so maybe they haven't updated the site yet.

_____________
Synergy N9

07-14-2006 Over year old.

HOMEPAGE

Palo
Heliman
Location: Slovakia

Thank you very much for your advices friends.
I will buy SAB 0221 680mm blades.

Palo

07-17-2006 Over year old.

1 page

473 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

Avant Aurora - EFX - FX > Avant EFX which SAB blades

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic