RunRyder - Question about the flybar control rods (Hoops)

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 639 ONLINE 19 EVENTS SEARCH REGISTER START HERE

1 page

914 views

POST REPLY

Next D	.	Fast Lad Performance	.	Ace Hobby
	.		.

After Market Accessories > Question about the flybar control rods (Hoops)

RadioFlyerMk
Senior Heliman
Location: Trenton, Ohio,

Ok, hope this is where I would ask this. Those Hoops, the ones that are aluminum with the plastic ball link ends on them. Can you replace just the balll link end? And, if so, where do you get the ends?

I have a set, and one of the ball ends will un-fasten quite easily and I don't trust it until it is replaced.

07-07-2006 Over year old.

BarracudaHockey
rrMaster
Location: Orange Park FL

If you are talking about the Raptor you are better off just using the plastic ones, it gives a nice point for something cheap to break to disappate the energy if you hit something.

AMA 77227
http://www.jaxrc.com

07-07-2006 Over year old.

RadioFlyerMk
Senior Heliman
Location: Trenton, Ohio,

Right, I just had a set here and thought I may want to use them but one of the links was a bit loose. But since posting this, I have finally spoke with a fellow heil pilot and he explained that you just screw the old ones out and the new ones in. I did not know that. It's amazing at the simplest things you can learn, and then think, now I should have known that....

-----------------------
"I'd rather hover a Heli......than fly a plane"

08-17-2006 Over year old.

ronlaw
Heliman
Location: uk-scotland

hi just add my bit lock it from the back thuo hoop into ball link with a small selftapper to lock it so it will not come out both ends

08-19-2006 Over year old.

1 page

914 views

POST REPLY

Esprit Model	.	Thunder Power RC	.	Mikado Modellhubschrauber
	.		.

After Market Accessories > Question about the flybar control rods (Hoops)

PRINT TOPIC

Advertisers

Subscribe to This Topic