Dketchum
Heliman
Location: San Antonio, TX
| I am a little perplexed as I try and setup to drive my retract servos on my Bell 222 Heli, I am using a Hitec Supreme RCD3800 receiver, and Hitec Retract servos.
I wanted to use channel 5 for the retracts, In helimode, channel 5 is assigned to gyro sensitivity, I won't need that as I am using a gy240 gyro in Heading hold mode. I can hook the servos to channel 5 and the switch will drive them through their travel, however, the ATV setting for Channel 5(gyro sens) have no affect on the travel and I need to reduce it to work in my heli, Is there anyway to re-assign channel 5 function?
Or get ATV to actually work for this? Or am I going to have to go to channel 7, which for this receiver requires a special y connector to plug in the battery and give you a channel 7 also. Any help would be appreciated.
Dave |
