cquinby
Senior Heliman
Location: Tenino, WA
| That is my heli!O'C
Sorry buddy but those heli's do not come with rivets. You need to do them yourself and it does take time.
I used the following:
RC 56 (Clear canopy glue)
28 gauge 1cc syringe (Used 5 doing this project)
After you get your fuse all primed up and ready to go start placing the rivets. I was spacing them about every 1/2 cm and could get about 600 on per hour. I spent about 5 hours total time putting those rivets on.
After your doen shoot a light coat of primer on and then your off to the paint booth.
I did have one problem how ever. As I taped I managed to pull some paint off the rivets. Not sure why that happened but I then switched to 3m masking tape rather than my thin-line blue and I didn't have nay more problems, except the paint lines were a bit fuzzy.
Any questions feel free to PM me.
Chris
Chris |
