RunRyder - Kalt canopy

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 295 ONLINE 41 EVENTS SEARCH REGISTER START HERE

1 page

616 views

POST REPLY

Century Helicopter	.	MTA Hobbies	.	Model Rectifier Corp
	.		.

Antiques or Out of Business > Kalt canopy

Whirlydocr
Heliman
Location: Clarksville, TN

Anyone know if a canopy off another heli will fit the enforcer? Or where I can find a new canopy for it? Thanks David

11-09-2002 Over year old.

HOMEPAGE

Whirlydocr
Heliman
Location: Clarksville, TN

Anyone??

11-09-2002 Over year old.

HOMEPAGE

Clearance
Veteran
Location: Left Coast Canada

I still fly the Enforcer. Got 8, (5 new).

The bleach bottle portion is durable; the clear "canopy" section usually needs to be replaced in the event of an incident. The Century Hawk canopy (clear section) fits almost perfectly with a little trimming; you'll have to trace the outline of the original canopy and cut with scissors. Some fliers have replaced the Enforcer cabin/canopy with one for the Kalt Baron 30 (may be difficult to obain, now that HPI is not handling the Kalt line). The Kalt Alpha 30 canopy will also fit, but few of these helis were sold in North America.

Ken

11-11-2002 Over year old.

Whirlydocr
Heliman
Location: Clarksville, TN

Clearance, thank you for your help. The clear part is what I am needing to replace. One corner is cracke. Thanks again, David

11-11-2002 Over year old.

HOMEPAGE

johnny 5
Heliman
Location: western Ma.

kalt baron 30 with raptor canopy

Using an old cerial box cardboard i made a template to fit under the main frame and radio gear. Then I bent a pc of aluminum to the template using a bench vise and a small hammer. The part is mounted to the frame with #3 screws with locking nuts. The pc holds a small block of hard wood that fits into the front holding clamp on the raptor canopy. the wood is epoxied and has 2 small scews holding it to the aluminum. Where the 2 mounting screws in the back of the canopy go,I aligned a 3/16 drill(making sure it wont interfere with the main gear drive) and drilled straight through the main frame aligning with the hole in the canopy on the otherside. I then slide a 3/16 brass tube(local hobby shop)through that was cut long enough to touch the rubber grommets on both sides of the canopy. I soldered a washer on either side of the frame to the tube,to hold the tube centered in place.I epoxied inside the tube the inner plastic runner that goes through plastic tube ( the stuff rc planes use to get the rudder and elevators to connect to the servos) The pc was trimmed to the length of the brass tube. Now screws will hold in the nylon plastic within the brass tube and hold the rear of the canopy in place. It mounts solid and looks great!
E-mail me a ajbcc2@aol.com for pics I also have a couple of baron clears for sale..

11-13-2002 Over year old.

1 page

616 views

POST REPLY

PowerHelis	.	JR-Spektrum	.	Gyro Hobbies
	.		.

Antiques or Out of Business > Kalt canopy

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic