RunRyder - Scaedu 50 Lossing tail blades in the air...........

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 624 ONLINE 38 EVENTS SEARCH REGISTER START HERE

3 pages [ << < 1 2 ( 3 ) > >> ]

3317 views

POST REPLY

Midland Helicopters	.	HeliProz	.	ZoomsHobbies
	.		.

HIROBO Freya - Sceadu - Shuttle > Scaedu 50 Lossing tail blades in the air...........

Isaac F
Key Veteran
Location: Panama Republic of Panama

Quote
Spacers received. thanks

Hey carlos, nice to hear that you receive yor spare part from Mr. Irwin

I am pretty sure people here will like to hear your coments/review on how this Triple bearing Tail Assembly from Irwin QWW perfom.

Make sure to post some pics.

Good luck,

Isaac

10-10-2006 Over year old.

DS 8717
rrProfessor
Location: Here wishing i was somewhere else

I happened to check mine a while back and there was a piece missing from the blade grip where the bolt goes in. I put a new set on and reversed the thrust bearing and installed them like main grip bearings with the small out and now almost all the slop is gone. Been flying it for a couple months now with 2000 headspeed and all is well. Probably damaged the grip doing auto's,it touched the ground a few times but i checked them before i flew again.DOUG

10-10-2006 Over year old.

cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

Hi Isaac. I just place the tail grips. First the tail pitch link set does not fit very well into the blade grip ball links but I don't think it is a big issue and the screw set that came along with the tail grips were too short so I have to replace them for longer ones. I'll test the bird this weedend and let you know.

thanks

10-12-2006 Over year old.

Isaac F
Key Veteran
Location: Panama Republic of Panama

Quote
Hi Isaac. I just place the tail grips. First the tail pitch link set does not fit very well into the blade grip ball links but I don't think it is a big issue and the screw set that came along with the tail grips were too short so I have to replace them for longer ones. I'll test the bird this weedend and let you know.

(Red Arrow) Yes, you are right, the screw set on the tail grips are too short

(Green Arrow) About the tail pitch link on the blade grip balls, they look like they are fitting the ball link on a angle and not straight. I really dont know if this is OK. Maybe they can get loose in the air

Maybe you need to take more pictures of this issue and place them here on RR to see what other members think.

Good luck,

Isaac

10-12-2006 Over year old.

cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

I think it is fine as pitch link set has a linear movement. However it is not as it should be.

10-12-2006 Over year old.

Isaac F
Key Veteran
Location: Panama Republic of Panama

Quote
I think it is fine as pitch link set has a linear movement. However it is not as it should be.

Well, is a good idea that on the first fly, you have yor finger on the AUTO switch in case............. Also make sure to carry toilet paper with you

Isaac

10-12-2006 Over year old.

3 pages [ << < 1 2 ( 3 ) > >> ]

3317 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

HIROBO Freya - Sceadu - Shuttle > Scaedu 50 Lossing tail blades in the air...........

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic